LEFOO Controlador de bomba de agua LFPC-1

Con una instalación fácil y que ahorra tiempo. El controlador de la bomba de agua con el aislamiento completo de la pieza eléctrica y la tubería y el alto sellado hacen que el controlador tenga características propias de seguridad, protección del medio ambiente, larga vida, rendimiento estable, menos mantenimiento y sin ruido.

Aviso:

La presión de ajuste no es ajustable. Necesidad de instalar en la bomba de agua con una potencia superior a 200W. 3. No instale ningún grifo entre el controlador y las bombas. 4. La distancia entre el mando y el grifo más alto no debe exceder los 15M.

1. control automático de la operación de la bomba y el cierre.

2. Dejar de bombear automáticamente en caso de escasez de agua.

3. La llamada se iniciará automáticamente después de un corte de energía.

4. Manual de inicio obligatorio.

5. Protección de sobrepresión, la presión del sistema de más de 10 bares detiene automáticamente el trabajo de la bomba.

6. escasez de agua de inicio automático, el intervalo de tiempo de inicio automático es de 1 minuto, 30 minutos, 1 hora y luego de ciclo de 1 hora.

7. protección anti-tarjeta, no uso a largo plazo de la bomba, 48 horas para comenzar una vez.

8. sensor de presión de muestreo y pantalla LED, valor de presión del sistema de control en tiempo real.

9. Dos modos de trabajo incorporados, Modo Automático: el controlador puede ajustar automáticamente el valor de presión de inicio de acuerdo con la presión en la tubería, y puede monitorear la presión en la tubería en tiempo real. Cuanto mayor es la presión de la tubería, menor es la presión de inicio y menor es la presión de inicio. No es necesario configurarlo manualmente, para evitar el desajuste entre la presión de arranque y la cabeza de la bomba causado por el desajuste de la presión de arranque de configuración artificial y la cabeza de la bomba. Se producen obstáculos, que se pueden utilizar libremente en bombas en el rango de 10-98 metros de elevación, tensión nominal, corriente y potencia. Es especialmente adecuado para sistemas con presión mezclada y superpuesta (como presión de agua del grifo u otra presión de bomba de refuerzo). En comparación con los controladores de presión tradicionales, reduce en gran medida la ocurrencia de fallas, reduciendo así el costo de posventa y es más inteligente. Ajuste manual del valor de la presión de inicio, barra de 0,5 6,0 ajustable, amplia gama de regulación de la tensión, operación simple.

10. Interfaz de hilo: G1 ″ hilo externo.

11. Se puede configurar según los requisitos del usuario.

You can use an automatic pressure controller for your domestic or household water supply, equipped with a pump to manage the pressure of your shower, sinks, sprinklers, and more. They’re useful when combined with a domestic pressure booster pump or a rainwater tank pump.

Here are some of the essential applications of an automatic pressure controller:

It controls the pump to ensure it runs at a constant flow.

When showering at home without a pressure pump or automated pressure control, you might notice the water’s inconsistent temperature or intermittent water pressure. With a device that maintains a constant water flow, you’re bound to enjoy your showers a lot more.

It automatically starts and stops the water pump whenever you open or close a tap or valve.

With an automatic pressure controller, you don’t need to turn on your pressure booster or pressure pump every time you want to take a shower or wash the dishes. By opening a tap or sink, the electronic controller will automatically start the pump.

It protects your water pump from damage with its built-in features.

By installing an automatic pressure controller, you add an extra layer of protection to your water pump. As you probably know, many factors can cause a water pump to break, such as running dry, leaks, flow switch jamming, water shortages, and more. An automatic pressure controller is designed to help prevent all of these problems and more.

How Does An Automatic Pump Controller Work?

Now that you know what an automatic pump controller is and what it can do, let’s talk about how it works.

Basically, an automatic pressure controller is a motor that will automatically switch on when water in the overhead tank (OHT) falls below the lower limit and vice versa. The circuitry behind it is straightforward, minimizing the potential for electrical issues, and it is very energy efficient too. It is powered by a 12-volt DC power supply, which consumes around as much power as charging your phone.

Without getting too technical, an automatic pressure controller relies on the water pressure to operate. Using automatic pressure control will eliminate the need for all the other components in a traditional water pressure control system, making the plumbing in your home less complicated (and less expensive too).

With less complex controls and more automation – not to mention the absence of a pressure tank, – adjusting the water pressure in your home just got a whole lot easier.

Pros and Cons of an Automatic Pump Controller

Pros of Automatic Pump Pressure Controllers:

• Automatically stops the water pump from running dry and overheating when the water supply is running out

• Makes your plumbing or irrigation system more efficient, meaning you’ll save water and possibly electricity as well

• Automatically activates the electric pump, so you don’t need to stand by the water pump to turn it on or shut it down manually

• Runs on 12V DC power, meaning it is energy efficient

• When shut down, the auto-restart feature periodically checks if there is a water supply, so you don’t have to turn it on again manually

• The circuitry is less complicated than using a traditional water pressure system, meaning the plumbing is less cumbersome and troubleshooting is much simpler

Cons of Automatic Pump Pressure Controllers:

• Automation can have its disadvantages, as an automated device isn’t typically prepared for every possible scenario

• As it is an electronic device, the circuitry required a proper and secure cover, and the device can be damaged if water gets inside

• It Maybe challenging to install in some old houses or existing older-style plumbing networks

• An electrician may be required to connect an automatic pressure controller if not pre-integrated with a water pump

• Durability and longevity can vary depending on the price point – more expensive devices will inevitably deliver better results and offer more features

• Technology can still be challenging and unfamiliar for the older generations

• Significantly more expensive than manual pressure control valves

  
  

  
  

• How Do You Adjust an Automatic Water Pump Pressure Controller?

• Most automatic pump controllers for household use have set cut-in and shut-off points, so they don’t require adjusting. More advanced models can have customized pressure settings within a suitable range, which can be easily adjusted using buttons on the face of the controller.

• 
  

• Automatic Pump Control Troubleshooting

• To prevent automatic pump control failure caused by leaks and electrical problems, consider:

• If not already sealed, install a cover to protect the electrical components from water damage.

• If recommended by the manufacturer, use Teflon tape when installing to prevent any leaks.

• Make sure you consider using a barrel union between the pressure controller and the electric pump. It can be beneficial for future repairs and installation.

• Here are some common automatic pump controller problems and what to do about them.